0.67：Mastodon、Tahoma 开关与 Nanoleaf Aurora 灯光面板
0.67 版本来了！如果你错过了昨天的公告：Ubiquiti 现在正在赞助我撰写这些发布说明。没错，就是这么棒。这样我就有更多时间专注于我们推迟已久的一些重大改进，首先会是用户系统。
这个版本包含一项安全修复。在此前版本中，错误日志可通过 API 访问且不要求认证。虽然这本身不一定直接导致泄露，但如果某个组件错误地将敏感信息写入错误日志，就可能造成暴露（目前我们并不知道有组件会这样做）。感谢 Matt Hamilton 向我们披露这个问题。
新平台
- 新增
folder_watcher组件 (@robmarkcole - #12918) (folder_watcher docs) (new-platform) - 新增 FreeDNS 组件 (@bdurrer - #13526) (freedns docs) (new-platform)
- 新增 Google Maps 位置共享设备追踪器 (@michaelarnauts - #12301) (device_tracker.google_maps docs) (new-platform)
- 新增 Waze 路程时间传感器 (@Myrddyn1 - #12387) (传感器.waze_travel_time docs) (new-platform)
- 为 Amcrest IP 摄像头新增开关组件 (@adpriebe - #12992) (amcrest docs) (开关.amcrest docs) (new-platform)
- 新增 Mastodon 支持 (@fabaff - #13441) (通知 docs) (new-platform)
- Tahoma 开关 (@ikucuze - #13636) (tahoma docs) (开关.tahoma docs) (new-platform)
- Add support for Nanoleaf Aurora 灯光 面板 (@Oro - #13456) (灯光.nanoleaf_aurora docs) (new-platform)
发布 0.67.1 - April 17
- Fix Gogogate2 'available' 属性 (@dlbroadfoot - #13728)
- Fix so it is possible to ignore discovered config entry handlers (@Kane610 - #13741)
- Prevent vesync doing I/O in event loop (@balloob - #13862) (开关.vesync docs)
- Fix #13846 Double underscore in 蓝牙 address (@aav7fl - #13884) (device_tracker docs)
- Fix race 条件 for component loaded before listening (@balloob - #13887) (config docs)
- Missing property decorator added (@syssi - #13889) (风扇.xiaomi_miio docs)
- Fix call to parent broadlink 开关 (@Danielhiversen - #13906) (开关.broadlink docs)
- Import operation modes from air 加湿器 (@syssi - #13908) (风扇.xiaomi_miio docs)
- 升级 pyqwikswitch to 0.71 (@kellerza - #13920) (qwikswitch docs)
- 升级 somecomfort to 0.5.2 (@balloob - #13940) (温控.honeywell docs)
- 更新 pyhydroquebec to 2.2.2 (@titilambert - #13946)
- 更新 pyfido to 2.1.1 (@titilambert - #13947) (传感器.fido docs)
- Bumped pypollencom to 1.1.2 (@bachya - #13959) (传感器.pollen docs)
- Revert "升级 pyqwikswitch to 0.71 (@balloob - #13920) (qwikswitch docs)
如果你需要帮助……
……欢迎随时使用我们非常活跃的论坛，或加入我们的 chat 交流。发布说明虽然开放评论，但我们更推荐你使用前面的沟通渠道。谢谢。
报告问题
如果你遇到了由此版本引入的问题，请在我们的 issue tracker 中反馈，并确保完整填写 issue 模板中的所有字段。
不向后兼容的变更
- 更新默认 Pilight 端口号 (@frenck - #13419) (pilight docs) (breaking change)
- 更新到 BMW ConnectedDrive 的新
b2vapi(@ChristianKuehnel - #13305) (bmw_connected_drive docs) (binary_sensor.bmw_connected_drive docs) (门锁.bmw_connected_drive docs) (传感器.bmw_connected_drive docs) (breaking change) - 移除 MercedesME 组件。(@ReneNulschDE - #13538) (device_tracker docs) (mercedesme docs) (binary_sensor.mercedesme docs) (传感器.mercedesme docs) (breaking change)
- 为 webostv 增加频道上下切换。(@stephanerosi - #13624) (媒体播放器.webostv docs) (breaking change)
- 为 video/movie 增加媒体类型区分。(@tadly - #13612) (breaking change)
- Added ENTITY_ID_FORMAT import and set entity_id in init (@timmo001 - #13642) (开关.broadlink docs) (breaking change)
所有变更
- Updates default Pilight port number (@frenck - #13419) (pilight docs) (breaking change)
- 升级 mypy to 0.580 (@fabaff - #13420)
- 更新 to new "b2vapi" of BMW ConnectedDrive (@ChristianKuehnel - #13305) (bmw_connected_drive docs) (binary_sensor.bmw_connected_drive docs) (门锁.bmw_connected_drive docs) (传感器.bmw_connected_drive docs) (breaking change)
- Add code owner for Manual 报警 with MQTT Control (@colinodell - #13438)
- QNAP updates (@colinodell - #13435) (传感器.qnap docs)
- Xiaomi MiIO 风扇: Xiaomi Air 加湿器 集成 (@syssi - #12627) (风扇.xiaomi_miio docs)
- Bump songpal 版本, fixes lots of issues mentioned in #13022 (@rytilahti - #13440) (媒体播放器.songpal docs)
- Removed the google home 警告 from emulated_hue (@mf-social - #13436)
- Fixing odometer to display km (@alandtse - #13427) (传感器.tesla docs)
- 升级 keyring to 12.0.0 and keyrings.alt to 3.0 (@fabaff - #13452)
- 升级 aiohttp to 3.1.0 (@fabaff - #13451)
- Qwikswitch async & updates (@kellerza - #12641) (qwikswitch docs) (灯光.qwikswitch docs) (开关.qwikswitch docs)
- Make Telnet 开关 value 模板 optional (@DanNixon - #13433) (开关.telnet docs)
- 更新 yeelightsunflower to 0.0.10 (@lindsaymarkward - #13448)
- Add more info to issue 模板 (@c727 - #12955)
- [RFC] 更新 issue 模板 (@amelchio - #12989)
- 更新 total_connect_client to 0.17 for Honeywell L5100-WiFi Support (@phileaton - #13473) (alarm_control_panel.totalconnect docs)
- 升级 python-mystrom to 0.4.2 (@fabaff - #13485) (灯光.mystrom docs) (开关.mystrom docs)
- New 服务 added to control the power mode of the yeelight (@syssi - #13267) (灯光.yeelight docs)
- 升级 slacker to 0.9.65 (@fabaff - #13496) (通知 docs)
- Adds 模板 function state_attr to get 属性 from a 状态 (@Nossnevs - #13378)
- 升级 aiohttp to 3.1.1 (@fabaff - #13510)
- 更新 tradfri v5 (@lwis - #11187) (tradfri docs) (灯光.tradfri docs) (传感器.tradfri docs)
- Fix typos and 更新 link (fixes #13520) (@fabaff - #13529)
- Tradfri - unique_id's and color_temp support for rgb-bulbs (@NovapaX - #13531) (灯光.tradfri docs)
- Qwikswitch async refactor & 传感器 (@kellerza - #13509) (qwikswitch docs) (灯光.qwikswitch docs) (传感器.qwikswitch docs) (开关.qwikswitch docs) (new-platform)
- Adds folder_watcher component (@robmarkcole - #12918) (folder_watcher docs) (new-platform)
- 更新 rflink to 0.0.37 (@olskar - #12603) (rflink docs)
- Added file path validity checks to file 传感器 (@FrederikBolding - #12505) (传感器.file docs)
- Allow for overriding the DoorBird push 通知 URL in 配置 (@Klikini - #13268) (doorbird docs)
- Convert Hue to always use config entries (@balloob - #13034) (hue docs)
- Implement thermostat support for Alexa (@trisk - #13340) (alexa docs)
- deCONZ config entry (@Kane610 - #13402) (deconz docs)
- Remove andrey-git from requirements monitoring (@andrey-git - #13547)
- Fix BMW 设备 tracker toggling 状态 if vehicle tracking is disabled (@ChristianKuehnel - #12999) (device_tracker.bmw_connected_drive docs)
- Xiaomi MiIO 开关: Support for the Xiaomi Chuangmi Plug V3 (@syssi - #13271) (开关.xiaomi_miio docs)
- Add FreeDNS component (@bdurrer - #13526) (freedns docs) (new-platform)
- 更新 pylint to 1.8.3 (@scop - #13544)
- Google Maps location sharing 设备 tracker (@michaelarnauts - #12301) (device_tracker.google_maps docs) (new-platform)
- Check_config: Handle numbers correctly when printing config (@hAmpzter - #13377)
- Add support for Canary Flex (@snjoetw - #13280) (canary docs) (传感器.canary docs)
- Fixes #12758. Try other 摄像头 even if one fails to initialize (@PhracturedBlue - #13276) (amcrest docs)
- Added HassOpenCover and HassCloseCover intents (@tschmidty69 - #13372) (conversation docs) (遮盖 docs)
- rfxtrx lib 0.22.0 (@Danielhiversen - #13576) (rfxtrx docs)
- xiaomi lib 升级 (@Danielhiversen - #13577) (xiaomi_aqara docs)
- Remove MercedesME component (@ReneNulschDE - #13538) (device_tracker docs) (mercedesme docs) (binary_sensor.mercedesme docs) (传感器.mercedesme docs) (breaking change)
- Added Waze travel time 传感器 (@Myrddyn1 - #12387) (传感器.waze_travel_time docs) (new-platform)
- Added 开关 component to Amcrest IP 摄像头. (@adpriebe - #12992) (amcrest docs) (开关.amcrest docs) (new-platform)
- 升级 pyhydroquebec 2.2.1 (@titilambert - #13586)
- Add mastodon (@fabaff - #13441) (通知 docs) (new-platform)
- Added support for requesting RSSI values from 蓝牙 设备 (@FrederikBolding - #12458) (device_tracker.bluetooth_tracker docs)
- Fix mysensors 更新 callback (@MartinHjelmare - #13602) (mysensors docs)
- Broadlink (@Danielhiversen - #13585) (传感器.broadlink docs) (开关.broadlink docs)
- Fix IMAP email message_data (@zhaokoh - #13606) (传感器.imap_email_content docs)
- Re-add group polling as a fallback for observation (@lwis - #13613) (灯光.tradfri docs)
- Unflake folder watcher test (@balloob - #13569)
- Make mysensors updates and platform 设置 async (@MartinHjelmare - #13603)
- Use 0/1 for 树莓派 遮盖 GPIO writes rather than true/false (@fezfox - #13610) (遮盖.rpi_gpio docs)
- Fix Hue 错误 logging (@balloob - #13616) (hue docs)
- Bugfix for tradfri to correctly execute Command. (@lwis - #13618) (灯光.tradfri docs)
- Hue mireds value is actually 153 not 154 (@Skaronator - #13601) (灯光 docs)
- changed PyTado 版本 (@wmalgadey - #13626) (tado docs)
- 升级 py-cpuinfo to 4.0.0 (@fabaff - #13629) (传感器.cpuspeed docs)
- Add Switzerland (@fabaff - #13630) (binary_sensor.workday docs)
- Xiaomi Mi WiFi Repeater 2 集成 as 设备 tracker (@syssi - #13521)
- 升级 youtube_dl to 2018.04.03 (@fabaff - #13647) (media_extractor docs)
- 更新 plex.py (@kraddatz - #13659) (传感器.plex docs)
- Always enable config entries & remove config_entry_example (@balloob - #13663) (config docs)
- Add missing 服务 docs for hs_color (@armills - #13667)
- Add regex functions as templating 助手 (@mountainsandcode - #13631)
- Channel up and down for webostv (@stephanerosi - #13624) (媒体播放器.webostv docs) (breaking change)
- Added headers 配置 variable to 通知.rest component (@5LICK - #13674) (通知 docs)
- Spelling fixes (@scop - #13681) (device_tracker docs) (smappee docs) (alarm_control_panel.ifttt docs) (温控.nest docs) (遥控器.xiaomi_miio docs)
- Xiaomi MiIO 灯光: White Philips Candle 灯光 support (@syssi - #13682) (灯光.xiaomi_miio docs)
- Bugfixes HomeKit 遮盖, 灯光 (@cdce8p - #13689) (homekit docs)
- Minor style changes, cleanup (@cdce8p - #13654) (homekit docs)
- Bugfix: Zwave Print_node to logfile instead of console (@turbokongen - #13302) (zwave docs)
- 更新 HAP-python to 1.1.8 (@cdce8p - #13563) (homekit docs)
- 更新 ha-philips_js to 0.0.3 (@danielperna84 - #13702) (媒体播放器.philips_js docs)
- Coverage & Codeowners (@kellerza - #13700)
- Bump insteonplm to 0.8.6 to fix 传感器 message handling (@teharris1 - #13691) (insteon_plm docs)
- Fix asuswrt ap mode failure (@shuaiger - #13693) (device_tracker docs)
- Support color temperature in Homekit (@morberg - #13658) (homekit docs)
- Remove unused CONF_WATCHERS (@robmarkcole - #13678) (folder_watcher docs)
- Add media type separation for video/movie (@tadly - #13612) (breaking change)
- Adding 配置 to disable IP address as a requirement Fixes: #13399 (@PlanetJ - #13692) (device_tracker docs)
- Tahoma 开关 (@ikucuze - #13636) (tahoma docs) (开关.tahoma docs) (new-platform)
- Send XY color for non-osram hue bulbs (@armills - #13665) (灯光.hue docs)
- 更新 AbodePy 版本 to 0.12.3 (@MisterWil - #13709) (abode docs)
- Enable autodiscovery for MQTT 摄像头 (@jmtatsch - #13697) (MQTT docs) (摄像头.MQTT docs)
- Added ENTITY_ID_FORMAT import and set entity_id in init (@timmo001 - #13642) (开关.broadlink docs) (breaking change)
- Fix #10175 (@pschmitt - #13713)
- Add support for Nanoleaf Aurora 灯光 面板 (@Oro - #13456) (灯光.nanoleaf_aurora docs) (new-platform)
- Added gogogate2 遮盖 (@dlbroadfoot - #13467)
- Remove vendor lookup for mac addresses (@balloob - #13788) (device_tracker docs)
- iglo hs color fix (@armills - #13808) (灯光.iglo docs)
- Fix too green color conversion (@amelchio - #13828)
- Rename from aurora 灯光 to nanoleaf_aurora (@Oro - #13831) (灯光.nanoleaf_aurora docs)
- Channel up/down for LiveTV and next/previous for other apps (@stephanerosi - #13829) (媒体播放器.webostv docs)
- Add 认证 to 错误 日志 endpoint (@balloob - #13836) (api docs)