#VersaSense

The VersaSense integration supports the VersaSense Edge Gateway. The gateway is able to control hubs and their peripherals (sensors and actuators) in the mesh network.

#Configuration

To enable VersaSense in your installation, add it to your "configuration.yaml" file. :::tip 更改配置后需要重启 Home Assistant。 :::

# Example configuration.yaml entry
versasense:
  host: GATEWAY_URI

host:
  description: "The IP address or hostname of the VersaSense gateway. Including *protocol* and *port*, e.g., `https://gateway.versasense.com:8889`"
  required: true
  type: string

#Supported hardware

All VersaSense gateways with software version >= 1.0.2.10

The integration is tested with following peripherals and devices:

• S03 S04: Temperature and Humidity sensor
• S06: Barometric Pressure sensor
• S10: Light sensor
• S17: Object detection sensor
• S19: Buzzer actuator
• Pxx: SmartMesh IP Hub
• M01: SmartMesh Edge Gateway