Tesla Wall Connector

    The Tesla Wall Connector integration allows you to integrate your Gen 3 Tesla Wall Connector with Wi-Fi into Home Assistant.

    配置

    此集成可通过 UI 配置。前往 设置 > 设备与服务 添加。

    Supported functionality

    Entities

    The Tesla Wall Connector integration provides the following entities.

    Sensors

    • Energy - Running total of energy used by the Wall Connector.
    • Session energy - Energy used during the current charging session.
    • Status - Present status of the Wall Connector.
      • Possible states - booting, not_connected, connected, ready, negotiating, error, charging_finished, waiting_car, charging_reduced, charging
    • Contactor closed - Binary sensor indicating if the Wall Connector is currently charging.
    • Grid frequency - Sensor for grid frequency of the incoming AC power.
    • Grid voltage - Sensor for grid voltage of the incoming AC power.
    • Handle temperature - Sensor for temperature of the Wall Connector handle.
    • MCU temperature - Sensor for temperature of the Wall Connector Main Computing Unit (MCU).
    • PCB temperature - Sensor for temperature of the Wall Connector Power Control Board (PCB).
    • Phase current - Sensor for the power current of each incoming AC electricity phase.
    • Phase voltage - Sensor for the voltage of each incoming AC electricity phase.
    • Vehicle connected - Binary sensor indicating if a vehicle is connected.
    • Status code - Sensor for error codes generated by the Wall Connector.

    Energy dashboard

    Energy usage can be easily added to the built-in Energy dashboard using the energy sensor.

    To add the Tesla Wall Connector to your Energy dashboard:

    1. Navigate to Settings > Dashboards > Energy.
    2. In the Electricity grid section, select Add consumption.
    3. Select the Tesla Wall Connector's "Energy" sensor.
    4. Select Save.