#Teltonika

The Teltonika integration integrates Teltonika Networks routers with Home Assistant, allowing you to monitor cellular signal quality, modem temperature, and network connectivity.

#Supported devices

Most Teltonika routers running RutOS are supported, including:

• RUT series (RUT240, RUT950, RUT955, etc.)
• RUTX series (RUTX08, RUTX09, RUTX11, RUTX50, etc.)
• TRB series (TRB140, TRB245, TRB500, etc.)

#Prerequisites

You need the IP address and login credentials for your router's web interface.

Host:
  description: "The IP address or hostname of your router. The integration will try both HTTPS and HTTP."
Username:
  description: "Username for the router's web interface."
Password:
  description: "Password for the router's web interface."
Validate SSL certificate:
  description: "Enable SSL certificate validation. Leave disabled for self-signed certificates."

#Automatic discovery

Teltonika routers are automatically discovered via DHCP.

#Sensors

The integration creates the following sensors for each cellular modem:

• RSSI - Signal strength in dBm
• RSRP - Reference signal power in dBm (LTE/5G)
• RSRQ - Reference signal quality in dB (LTE/5G)
• SINR - Signal to interference ratio in dB
• Temperature - Modem temperature in °C
• Operator - Mobile network operator name
• Connection type - Network technology (2G/3G/4G/5G)

Signal sensors include additional attributes like frequency band and modem state.

#Data updates

Data is polled from the router every 30 seconds.

#Examples

#Signal monitoring card

type: entities
title: Cellular Signal Quality
entities:
  - entity: sensor.modem_2_1_rssi
    name: Signal Strength (RSSI)
  - entity: sensor.modem_2_1_rsrp
    name: Reference Power (RSRP)
  - entity: sensor.modem_2_1_rsrq
    name: Signal Quality (RSRQ)
  - entity: sensor.modem_2_1_sinr
    name: Signal/Noise Ratio (SINR)
  - entity: sensor.modem_2_1_temperature
    name: Modem Temperature
  - entity: sensor.modem_2_1_operator
    name: Network Operator
  - entity: sensor.modem_2_1_connection_type
    name: Connection Type

#Known limitations

• Only cellular modem monitoring is supported
• No SMS sending or router configuration
• Data usage statistics are not available

#Troubleshooting

#Connection issues

Verify the router is reachable on your network and the web interface is accessible. Check that you're using the correct IP address and credentials.

#Sensors unavailable

Ensure a SIM card is inserted and the modem has an active cellular connection. Check the modem status in the router's web interface under Network > Mobile.

#Removing the integration

#To remove an integration instance from Home Assistant

1. Go to Settings > Devices & services and select the integration card.
2. From the list of devices, select the integration instance you want to remove.
3. Next to the entry, select the three-dot menu. Then, select Delete.