TechnoVE

    The TechnoVE integration provides connectivity with TechnoVE Smart Charging Station through the station local API.

    配置

    此集成可通过 UI 配置。前往 设置 > 设备与服务 添加。

    Binary sensors

    The integration adds the following binary sensors:

    • Battery protected - On / Off
    • Charging - Charging / Not charging
    • Conflict with power sharing mode - On / Off
    • Power sharing mode - On / Off
    • Static IP - Connected / Not Connected
    • Update - Up-to-date / Update available

    Number

    The integration adds the following number entity:

    NameDescription
    max currentDetermines the maximum current limit that the charging station can provide to the vehicle. Note: this value can only be set when the power-sharing mode is not enabled.

    Sensors

    The integration adds the following sensors:

    • Input voltage
    • Output voltage
    • Max station current
    • Current
    • Total energy usage
    • Last session energy usage
    • Wi-Fi signal strength
    • Wi-Fi network name
    • Status, one of the following values:
      • Unplugged
      • Plugged, waiting
      • Plugged, charging
      • Out of activation period
      • High tariff period

    Switch

    The integration adds the following switch:

    NameDescription
    Auto-charge modeWhen enabled, vehicles will start charging automatically when plugged in. When turned off, charging will need to be manually started each time a vehicle is plugged in. Note: Disabling auto-charge mode does not interrupt an ongoing charging session.
    Charging enabledWhen enabled, vehicles will be able to charge. Disable it to stop a vehicle from charging. Note: This switch can only be used when auto-charge mode is disabled.