#Swiss Hydrological Data

The Swiss Hydrological Data integration will show you details (temperature, level, and discharge) of rivers and lakes in Switzerland.

#Setup

The station overview contains a list of all available measuring points and will help to determine the ID of station which is needed for the configuration.

#Configuration

To enable this integration, add the following lines to your "configuration.yaml" file. :::tip 更改配置后需要重启 Home Assistant。 :::

# Example configuration.yaml entry
sensor:
  - platform: swiss_hydrological_data
    station: STATION_ID
    monitored_conditions:
      - temperature
      - level
      - discharge

station:
  description: The ID of the measurement point.
  required: true
  type: string
monitored_conditions:
  description: The list of measurements you want to use. Available is `temperature`, `level` or `discharge`.
  required: false
  type: list
  default: temperature

Sensors are exposing additional values through their attributes for all available conditions:

• max-24h: The maximum measurement for the last 24 hours.
• mean-24h: The mean measurement for the last 24 hours.
• min-24h: The minimum measurement for the last 24 hours.
• station_update: There is a time span between the sensor update in Home Assistant and the updates from the stations. Include those information if you are building automations based on the discharge of a water body.

:::note The sensors don't show the latest measurement, but those from the last hour due to the source of data. Some stations also don't provide data for certain measurements.

::: The hydrological measurements are coming from the Swiss Federal Office for the Environment (Bundesamt für Umwelt - Abt. Hydrologie) and are updated every 10 minutes.