#SleepIQ

The SleepIQ integration lets you integrate your SleepNumber Bed via SleepIQ by SleepNumber.

#Prerequisites

You will need an account on SleepIQ to use this integration.

#Supported device types

There is currently support available for the following platforms within Home Assistant, depending on the bed's capabilities:

• Binary sensor - View occupancy of each side
• Button - Calibrate the bed
• Button - Stop the pump
• Light - Control lights on supported models
• Number - View/Set the actuator positions of the foundation
• Number - View/Set firmness for each side
• Select - Choose a foundation preset position
• Select/Number - Set a foot warmer mode and timeout
• Select/Number - Set core climate heat/cool modes and timeout
• Sensor - View pressure of each side
• Switch - Toggle Privacy mode

#Notes

• If you are using a DNS-based ad-blocker such as Pi-hole, you may need to disable it temporarily while configuring this item in Home Assistant.
• The Sleep Number bed communicates with endpoints on sleepnumber.com as well as the AWS Firehose data collection service at firehose.us-east-1.amazonaws.com.