ROMY Vacuum Cleaner

The ROMY integration allows you to control your ROMY vacuum robot.

This integration currently supports the following models:

配置

此集成可通过 UI 配置。前往 设置 > 设备与服务 添加。

Actions

Currently supported actions are:

The ROMY will add the following sensors.

Binary Sensors:

Dustbin present: True if dustbin is inserted.
Robot docked: True if the robot is docked.
Watertank present: True if watertank is mounted (only present for ROMY's with wet cleaning function).
Watertank empty: True if watertank is empty and water infill is required (only present for ROMY's with wet cleaning function).

Sensors:

Battery Level: The battery level in percent.
RSSI: Wi-Fi signal strength.
Dustbin Dirt Level: The raw dustbin dirt sensor value (not every ROMY has one).
Total cleaning time: How many hours the robot has spent cleaning in total.
Total cleaning runs: The total number of cleaning runs.
Total cleaned area: The total area in m² the robot has cleaned.
Total distance driven: The total distance in m the robot has driven.

You have to enable the local interface first with a password. This is printed as QR Code on a label directly under the dust bin inside the robot.

Is available as download under romy-robot-interface-protocol