Netio
The Netio integration allows you to control your Netio Netio4, Netio4 All, and Netio 230B. These are smart outlets controllable through Ethernet and/or Wi-Fi that reports consumptions (Netio4all). This integration requires Telnet to be enabled on the Netio device.
To use Netio devices in your installation, add the following to your configuration.yaml file.
After changing the configuration.yaml file, restart Home Assistant to apply the changes. The integration is shown on the integrations page under Settings > Devices & services. Its entities are listed on the integration card itself and on the Entities tab.
要从 Netio 设备获取推送更新,可以在设备界面中添加此 Lua 代码,作为“Netio”“系统变量更新”上触发的操作,并指定“始终”计划:

