The Nanoleaf integration allows you to control and monitor Nanoleaf Light Panels, Canvas, Shapes, Elements, and Lines.

此集成不支持 Nanoleaf Remote 和 Essentials 灯。通过 HomeKit 控制器集成，可以通过 Thread 和蓝牙控制 Nanoleaf Essentials 灯。

#Configuration

To add the Nanoleaf device to your Home Assistant instance, use this My button:

Nanoleaf can be auto-discovered by Home Assistant. If an instance is found, it will be shown as Discovered and can be set up right away.

Manual configuration steps

• Browse to your Home Assistant instance.
• Go to Settings > Devices & services.
• In the lower-right corner, select Add integration.
• From the list, select Nanoleaf.
• Follow the instructions on screen to complete the setup.

#Transition and brightness

在动作中使用过渡（例如“light.turn_on”）时，过渡仅应用于亮度，不适用于颜色。当动作设置了过渡但不包含亮度时，灯光将自动过渡到 100% 亮度。

#Removing the integration

此集成遵循标准集成删除，不需要额外的步骤。

#To remove an integration instance from Home Assistant

1. Go to Settings > Devices & services and select the integration card.
2. From the list of devices, select the integration instance you want to remove.
3. Next to the entry, select the three-dot menu. Then, select Delete.