Irish Rail Transport

    The Irish Rail Transport integration will give you the time until the next two departures (within 90 minutes) from an Irish Rail station using the RTPI information.

    A station name is the full station name as specified on the Irish Rail search site, for example, Tara Street or Dublin Connolly.

    To activate the sensor add the data to your "configuration.yaml" file as shown in the example: :::tip 更改配置后需要重启 Home Assistant。 :::

    # Example configuration.yaml entry
sensor:
  - platform: irish_rail_transport
    station: "Tara Street"
    name: "To Greystones"
    station:
  description: The name of the station.
  required: true
  type: string
direction:
  description: The direction of the train. Typically either `Northbound` or `Southbound`.
  required: false
  type: string
destination:
  description: The name of the destination station to filter by.
  required: false
  type: string
stops_at:
  description: An optional filter based on the name of a station that the train stops at.
  required: false
  type: string
name:
  description: A friendly name for this sensor.
  required: false
  default: Next Train
  type: string

    Using the stops_at option will cause an extra request per train found. Therefore, if you are looking at a busy station, it is recommended that you also use at least one other filter. For example:

    # Example full configuration.yaml entry
sensor:
  - platform: irish_rail_transport
    station: "Tara Street"
    direction: Southbound
    destination: Greystones
    stops_at: "Dun Laoghaire"
    name: "To Greystones"

    The above example will show the next 2 Southbound trains that leave Tara Street station, going to Greystones via Dun Laoghaire: