EPH Controls

The EPH Controls integration lets you control EPH Controls thermostats. The module only works if you have a Wi-Fi gateway to control your EPH system and an account on the EMBER app.

To set it up, add the following information to your "configuration.yaml" file: :::tip 更改配置后需要重启 Home Assistant。 :::

climate:
  - platform: ephember
    username: YOUR_EMAIL
    password: YOUR_PASSWORD

A single interface can handle up to 32 connected devices.

username:
  description: The email address you used to sign up to the EMBER app.
  required: true
  type: string
password:
  description: The password you used to sign up to the EMBER app.
  required: true
  type: string

The supported operation modes map to the ON/OFF period selection of your timeswitch / EMBER app. These include:

Auto The timeswitch operates 3 on / off periods per day.
On The timeswitch is permanently on.
Off The timeswitch is permanently off.

If All Day is selected in the EMBER app it will show as Auto in Home Assistant. To Boost your heating, you should use the climate.set_aux_heater action on your zone entity. This will then Boost that zone for 1 hour.

#EPH Controls

EPH Controls